Microscopic Image Size Analyzer

• Type: Dynamic Laser
• Sample Feeding: Wet Dispersion
• Warranty: 1 Year
• Measuring Principle: Full Scale Laser Diffraction
• Particle Size Range: 0.1μm -1500μm /0.01μm -1500μm
• Detection System: 90/96 Channel Uniformly Crossed and Area-Compensat
• Model NO.: MIS800
• Laser: Imported High Power Fibre Output Semiconductor Las
• Laser Management: Lims Laser Intelligent Management System
• Optical Model: Full-Range Mie Scattering Theory
• Filtering Method: Dual Lens Filtering
• Acquisition Motherboard: 16bit,200kbs Ultra High Speed Acquisition Motherbo
• Concentration Range: Minimum Shade 3 Per Cent, Maximum Shade 90 Per Cen
• Cuvette: Special Coating Process, Light Signal Transmittanc
• Protective Function: Ultrasonic Anti-Dry Burn
• Ultrasonic Power: 50W/60W Selectable
• Centering System: Mechanical Centre + Optical Centre Dual Positionin
• Measuring Time: Typical <10 Seconds
• Environmental Temperature: 0°c-45°c
• Transport Package: Wooden Case
• Specification: 1050mm× 320mm× 335mm
• Origin: China
• HS Code: 9027809990
• Production Capacity: 200 Sets Per Month

Product Description

Product Name: MIS800 Micro Image Particle Size Analyzer
Technical standards: ISO13322-1: 2004; GB/T21649.1-2008
Test range: 1μm-6000μm
Detection unit: electron microscope
Laser type: image method

Product Introduction    
MIS800 is the latest generation of static particle image analysis equipment in China. It uses the latest image acquisition system and analysis software to combine computer graphics with particle size and particle analysis theory to obtain clear particle images while granular particle size. The characterization parameters of the particle size and shape, such as the spherical shape, the aspect ratio, the bulk ratio, and the surface rate, are presented in the form of eigenvalues and distributions, so that the user can understand the particles in detail. In addition, the instrument also gives the automation, intelligent energy era of the logo, making it easier to operate, smarter analysis, more stable results, is the preferred partner and assistant for particle size testing and particle analysis.

The characteristics
Visually reflect the particle shape:
The surface topography of the particles is directly reflected on the computer screen, and the user can intuitively and comprehensively understand the surface and shape properties of the particles;
Perfectly stitch multiple images:
The multiple particle images taken in different fields of view are spliced into one frame, so that the number of particles participating in the analysis is more, and the test results are more representative;
Automatically split adhesion particles:
Using a more advanced particle recognition algorithm, the adhesion particles of various shapes can be automatically segmented, which significantly improves the accuracy of adhesion particle segmentation, reduces human participation, and effectively shortens image processing time;
Adaptive binarization:
Adopting an adaptive binarization function, it is not affected by the shooting light when performing image binarization processing, avoiding the loss of particle information due to factors such as uneven light, and laying the foundation for the accuracy of subsequent processing. ;
Automatic processing of particle images:
The particle image analysis software contains an automatic processing tool set that integrates the automatic operation of binarization, elimination of boundary incomplete particles, elimination of noise, filling of voids, smoothing of edges, separation of adhesion particles, calculation of particle parameters, etc. The whole process of particle image processing to the generation of analysis results is simple and reliable.
Freely switch the particle size unit:
The ruler selection supports multiple length units and can be freely switched between nanometer, micrometer and millimeter, which is convenient for users to further process the particle images obtained by other means such as electron microscopy;
Quickly process special shaped particles:
 For spherical particles, a unique processing algorithm is used to directly analyze the particle size information without any processing on the original image. Even if the particles adhere or overlap each other, the analysis results are not affected, and the analysis efficiency of the spherical particles is improved.

 Application:
     MIS800 static particle imager is suitable for cement, ceramics, pharmaceuticals, coatings, resins, dyes, pigments, fillers, chemical products, catalysts, coal powder, mud, dust, flour, food, additives, pesticides, explosives, graphite, photosensitive materials, Fuel, metal and non-metal powders, calcium carbonate, kaolin and other powder industries.


Technical Parameters

Model		MIS800
Executive standard		ISO13322-1:2004; GB/T21649.1-2008
Microscopy system	Objective lens	4X, 10X, 40X, 60X, 100X (oil) long-range achromatic (flat field) objective lens group
	eyepiece	1X, 10X, 16X large field of view camera eyepiece
	Stage	Manual 3D mechanical stage, size: 185mm × 140mm, Movement range: 50mm × 75mm, coarse and micro coaxial focusing, Micro-motion value: 2μm, with locking and limiting device
	light source	Bottom transmission light source, 6V 20W halogen lamp, adjustable brightness. Optional top metallographic projection source (with polarizer)
	Total magnification	4 times - 1600 times
Camera system	Highest resolution	2048×1536
	Pixel size	3.2μm×3.2μm
	Imaging element	1/1.8 inch progress scan CMOS
	Frame rate	6fps@2048×1536 / 10fps@1600×1200 / 15fps@1280×1024 / 30fps@640×480
	Highest definition	900 line
	Signal to noise ratio	Less than 42dB
	Sensitivity	1.0V@550nm/lux/S
	output method	USB2.0
	Actual observation range	1-6000μm
Software function	Static acquisition	Take the sample topography as a high-resolution JPG image
	Picture processing	Use a variety of drawing tools to make the image easier to handle
	Image stitching	Seamlessly stitching multiple images, you can get more particles in the particle test to improve the representativeness of the test. At the same time, it can also be spliced after single analysis and storage, which further improves the accuracy of the results.
	Automatic processing tool set for particles	Automated elimination of particle adhesion, automatic elimination of noise, automatic elimination of boundary incomplete particles, automatic filling of hollow areas of particles, automatic smoothing of particle edges and other 12 automatic processing tools.
	Scale calibration	After calibration by the national standard micrometer, each test only needs to select the scale value corresponding to the objective lens to directly obtain the actual size value of the particle.
	Single particle data	The analysis of more than 10 parameters such as cross-sectional area, volume, and aspect ratio of a single particle can be directly performed on the image.
	Task management mechanism	Strict task management mechanism enables users to manage all test data in a well-organized manner.
	Report output	Output the test results as a report and freely modify the report style.
	Overall distribution characteristic parameter	Characteristic parameters of particle distribution such as D10, D50 (median diameter), D90, D100, etc.
Report parameter	Cumulative distribution of overall frequency distribution	Data distribution, graph, histogram, etc. of frequency distribution and cumulative distribution of particles distributed by quantity, volume, area, etc..
	Statistical mean diameter	Common statistical average diameters such as Xnl, Xns, Xnv, Xls, Xlv, and Xsv
	Shape parameter	More than 10 commonly used data to characterize particle shape, such as aspect ratio, bulk ratio, sphericity, surface area, specific surface area, and circumscribed rectangular parameters
	Statistics	Directly obtain the number of particles observed
	Sample thumbnail	Sample color or black and white (optional) thumbnails can be displayed in the report
	Header input	You can enter multiple information such as sample name, test unit, and dispersion medium into the report header.