Thermal Conductivity Tester (Protected hot plate heat flow meter method)

• Customization: Available
• Type: Dynamic Laser
• Sample Feeding: Wet Dispersion
• Model NO.: DRPL-2A
• Measuring Principle: Full Scale Laser Diffraction
• Particle Size Range: 0.1μm -1500μm /0.01μm -1500μm
• Detection System: 90/96 Channel Uniformly Crossed and Area-Compensat
• Laser: Imported High Power Fibre Output Semiconductor Las
• Laser Management: Lims Laser Intelligent Management System
• Optical Model: Full-Range Mie Scattering Theory
• Filtering Method: Dual Lens Filtering
• Acquisition Motherboard: 16bit, 200kbs
• Concentration Range: Minimum Shade 3 Per Cent, Maximum Shade 90 Per Cen
• Cuvette: Special Coating Process, Light Signal Transmittanc
• Protective Function: Ultrasonic Anti-Dry Burn
• Ultrasonic Power: 50W/60W Selectable
• Centering System: Mechanical Centre + Optical Centre Dual Positionin
• Measuring Time: Typical <10 Seconds
• Environmental Temperature: 0°c-45°c
• Transport Package: Wooden Case
• Specification: 1050mm× 320mm× 335mm
• Origin: China
• HS Code: 9027809990
• Production Capacity: 200 Sets Per Month

Product Description

 

 

 

Overview
 Reference standards for this instrument: GB/T6699.1-2001 Test methods for natural facing stones Part 1: Test methods for compressive strength after drying, water saturation, freeze-thaw cycles, GB/T11968-2020 Medium to medium compressive strength of autoclaved aerated concrete Requirements for strength testing, GB/T 5072-2008 "Test Method for Compressive Strength at Normal Temperature of Refractory Materials", GB/T 4740-1999 Test Method for Compressive Strength of Ceramic Materials, GB1964-1996 Test Method for Compressive Strength of Porous Ceramics and other standard requirements, Suitable for testing the compressive strength of non-metallic materials such as ceramics, stone, cement, concrete materials, refractory materials, and insulation materials.

Main technical parameters
1. Maximum load: 10KN;
2. Loading rate: 50-7KN/min adjustable;
3. The pressure instrument has a digital display that automatically stops when it breaks and keeps displaying the maximum pressure value;
4. Sample size: compression resistance ≤ 50mm;
(Clamps of other sizes can be customized according to customer requirements)
5. Data microcomputer processing, accuracy 0.5%;
6. Voltage: single-phase 220V, 50HZ.
Configuration: Includes one SGY-10KN test host and one set of compression clamps.